FIA Formula 3 Championship
The FIA Formula 3 Championship is a third-tier international single-seater racing championship and organised by the Fédération Internationale de l'Automobile (FIA). The championship launched in 2019 as a feeder series for the FIA Formula 1 World Championship and FIA Formula 2 Championships. It was the result of a merger between two third-tier single-seater racing championships, the GP3 Series and the FIA Formula 3 European Championship as it was announced on 10 March 2018. The championship is part of the FIA Global Pathway consolidation project plan. Unlike its predecessor, the Formula 3 European Championship, the series runs exclusively in support of Formula one races.
Origins and history
On 13 March 2017 it was announced that the GP3 Series would merge with the FIA and DMSB's FIA Formula 3 European Championship and as such, both bodies would merge their both third-tier open-wheel single seater formula racing series, the GP3 Series and FIA Formula 3 European Championship respectively, with plans to début in 2019. On 1 September 2017 the merger committee announced that World Motor Sport Council were selected to develop the name, logo and identity of the new series. The reveal date for the new series was 10 March 2018 at the FIA headquarters at Paris, France. GP3 Series CEO Bruno Michel announced the new sanctioning body would be sanctioned by FIA from 2019 season and thus become Formula One's sole support Grand Prix weekends mostly in Europe. FIA President Jean Todt then announced the new FIA Formula 3 Championship title and logo later in October 2018.
The FIA Formula 3 Championship car is used by all of the teams, and features a Dallara carbon-fiber monocoque chassis powered by a Mecachrome naturally-aspirated direct-injected V6 engine and Pirelli dry slick and rain treaded tyres.
The F3 Championship will use the 2019 specification F3 2019 car which has been designed by Dallara Automobili. The new FIA Formula 3 Championship chassis material is Carbon/aluminium honeycomb structure and also Carbon Aramid honeycomb bodywork structure. The new FIA Formula 3 Championship car's front wings are slightly wider and also wider-lower rear wing.
Transmission, gearbox and clutches
The current gearbox has been manufactured by Hewland and features an 8-position barrel with ratchet body and software upgrades as well as a new transverse shafts fixing system designed to facilitate improved gear selection. Currently, the FIA Formula 3 Championship gearbox uses a 6-speed sequential gearbox configuration with electro-hydraulic control via paddle-shifters, with reverse operated by a reverse button on the steering wheel. The clutches of all FIA Formula 3 Championship cars are supplied by AP Racing with the multi-plate clutch operated by a hand-paddle lever.
O.Z. Racing exclusively supplies wheel rims for all FIA Formula 3 Championship cars.
Pirelli will continue supplying tyres for all FIA Formula 3 Championship cars as they have done since the GP3 Series era. The tyre size of all cars will still remain the same as in the GP3 Series. The tyre sizes are 250/575-R13 on the fronts and 290/590-R13 on the rears. The compounds of Pirelli Formula 3 tyres are currently three dry compounds (red soft, yellow medium and white hard) carrying the "P Zero" brand and one wet compound (blue wet) carrying the "Cinturato" brand.
The suspension of all FIA Formula 3 Championship cars is upper and lower steel wishbones, pushrod operated, coupled with twin Koni dampers and torsion bars suspension (front) and spring suspension (rear) similar to current Formula One car suspension.
From the 2019 season, all FIA Formula 3 Championship cars will utilize the all-new XAP Single-seat Formula 2451 S3 steering wheel with a larger dash screen and also three new rotary switches (similar to the current FIA Formula E and FIA Formula 2 steering wheel).
The current safety innovation of FIA Formula 3 Championship is the top priority. Front, side, rear and steering column impact tests are the FIA safety standards. All of the FIA Formula 3 Championship cars include front and rear roll hoop, impact structures and monocoque push tests. Anti-intrusion survival cell protection panels are also featured since 2019. Wheel retainer safety cables are also featured to avoid wheel flying similar to Formula One, IndyCar Series (known as SWEMS) and other single-seater Formula racing series. The seat belts of all FIA Formula 3 Championship cars are supplied by Sabelt with 6-point seat belt configuration similar to Formula One. From 2019 onwards, the “halo” cockpit protection system would be introduced to avoid the series of fatal crashes.
All FIA Formula 3 cars carry a Magneti Marelli-provided electronic control unit as well as Magneti Marelli power supply management unit. Live telemetry is used only for television broadcasts, but the data can be recorded from the ECU to the computer if the car is in the garage and not on the track.
Rear view mirrors for all FIA Formula 3 cars are mandated for easy viewing of opponents behind.
The aerodynamics of current FIA Formula 3 Championship cars are resembling the Formula One 2017-style aerodynamic with wider and curved front wing and also lower rear wing with parallelogram rear wing plate. Side winglets are also banned. The undertrays of all FIA Formula 3 Championship cars are grounds-effect underbody as opposed to flat-bottom underbody that usually utilized in Formula One.
Drag Reduction Systems (DRS)
Since 2017 GP3 Series season, the Drag Reduction Systems (DRS) were introduced in a purpose for overtaking maneuver assist by tilting the upper-element rear wing while approaching the opponent less than a second away by activating the DRS paddle behind the steering wheel. The upper-element rear wing angle of FIA Formula 3 car rear wing is the same angle as Formula One car which has over 40 degrees of angle. In an event of rainy conditions, Drag Reduction Systems are automatically deactivated for safety reasons.
First generation (second-generation overall)
The series will remain using the 3.4-litre V6 naturally-aspirated direct-injected engines supplied by Mecachrome until at least the 2021 season due to FIA Formula 3 Championship not being interested in a turbocharged engine. The horsepower will be scaled down from 400 to 380 hp (298 to 283 kW).
Mecachrome V634 F3 V6 engines were crated and shipped to all FIA Formula 3 Championship teams on a serial-number basis as determined by the FIA to ensure equality and fairness in distribution.
Fuel and lubricants components
All Formula 3 cars currently use ordinary unleaded racing gasoline as fuel (similar to commercial vehicle unleaded street gasoline), which has been the de facto standard in third tier single-seater formula racing since the introduction of GP3 Series in 2010. Current Elf LMS 102 RON unleaded gasoline resembles ordinary unleaded gasoline but produces better mileage while being environmental-friendly and safer than other fuels. Since 2019, Elf exclusively continues providing the LMS 102 RON unleaded fuel and also Elf HTX 840 0W-40 lubricants for all FIA Formula 3 Championship cars.
The car also features internal cooling upgrades, a new water radiator, radiator duct, oil/water heat exchanger, modified oil degasser, new oil and water pipes and new heat exchanger fixing brackets.
- Engine displacement: 3.4 L (207 cu in) DOHC V6
- Gearbox: 6-speed paddle shift sequential semi-automatic gearbox (must have reverse)
- Weight: 1,484 lb (673 kg)
- Power output: 380 hp (283 kW)
- Fuel: Elf LMS 102 RON unleaded
- Fuel capacity: 65 litres (17 US gallons)
- Fuel delivery: Direct fuel injection
- Aspiration: Naturally aspirated
- Length: 4,965 mm (195 in)
- Width: 1,885 mm (74 in)
- Wheelbase: 2,880 mm (113 in)
- Steering: Non-assisted rack and pinion
- Tyres: Pirelli P Zero dry and Cinturato wet
The inaugural season of the FIA Formula 3 Championship consisted of 16 races held across eight rounds at European circuits, beginning on 11 May at the Circuit de Barcelona-Catalunya and ending on 29 September at the Sochi Autodrom. 2019 marked the debut of the new Dallara F3 2019 chassis, powered by a naturally-aspirated 3.4L V6 engine developed by Mecachrome, the same engine used in the car's GP3 Series predecessor the Dallara GP3/16. This also marked the debut of the halo safety device, bodywork that had been introduced in Formula 1 and Formula 2 in 2018.
Prema Racing won the teams' championship, scoring over twice as many points as runners-up Hitech Grand Prix and extending their streak to seven consecutive teams' championships from the predecessor FIA Formula 3 European Championship. The three Prema Racing drivers finished in the top three positions in the drivers' championship. Robert Shwartzman finished the season as champion, having taken three race wins including the first race in Barcelona. Marcus Armstrong finished as runner-up with Jehan Daruvala in third.
The 2020 championship was due to begin at the Bahrain International Circuit on 21 March, with Circuit Paul Ricard being dropped from the calendar in favour of Circuit Zandvoort. However, the first three rounds of the championship were postponed in response to the COVID-19 pandemic. A revised calendar was published in June, consisting of 18 races across nine rounds held alongside the first nine races of the Formula One World Championship. The season began at the Red Bull Ring on 4 July and concluded at the Mugello Circuit on 13 September.
Prema Racing secured their eighth consecutive teams' championship at Monza with three races left to go. Prema driver Oscar Piastri ended the season as champion, securing the title at the final race. He finished three points ahead of ART Grand Prix driver Théo Pourchaire, with Prema's Logan Sargeant in third place.
|Season||Driver||Team||Poles||Wins||Podiums||Fastest laps||Points||% points achievable||Clinched||Margin|
|2019||Robert Shwartzman||Prema Racing||2||3||10||2||212||55.208||Race 15 of 16||54|
|2020||Oscar Piastri||Prema Racing||0||2||6||4||164||37.963||Race 18 of 18||3|
|2019||Prema Racing||4||8||24||8||527||Race 12 of 16||304|
|2020||Prema Racing||4||7||16||9||470.5||Race 15 of 18||209|
Drivers graduated to FIA Formula 2 Championship
|Driver||FIA Formula 3||FIA Formula 2||Other major titles|
|Marcus Armstrong||2019||16||3||7||2020||ART Grand Prix||20||0||2||2017 Italian F4 Championship|
|Felipe Drugovich||2019||16||0||0||2020||MP Motorsport||20||2||2||Euroformula Open Championship|
|Christian Lundgaard||2019||16||1||2||2019-2020||Trident||22||2||6||F4 Spanish Chmpionship|
SMP F4 Championship
|Pedro Piquet||2019||16||1||3||2020||Charouz Racing System||20||0||0||Formula 3 Brazil|
|Robert Shwartzman||2019||16||3||9||2020||Prema Racing||20||3||5||Toyota Racing Series|
|Yuki Tsunoda||2019||16||1||3||2020||Carlin||20||2||5||Japanese F4 Championship|
|Jüri Vips||2019||16||3||4||2020||DAMS||8||0||1||ADAC Formula 4 Championship|
- Gold background denotes FIA Formula 3 champion.
- Simmons, Marcus. "GP3 and European Formula 3 could merge as F1 support series in 2019". Autosport.com. Retrieved 13 March 2017.
- Hewitt, Chloe. "World Motor Sport Council Confirms New Formula 3 Category For 2019". thecheckeredflag.co.uk. Retrieved 22 September 2017.
- "Formula 1 to promote the FIA Formula 3 Championship". formula1.com. Retrieved 10 March 2018.
- "New International F3 car set to use GP3 engine". Motorsport.com. Retrieved 5 July 2018.
- "FIA announces 2019 calendars for F2 and F3". Motorsport.com. Motorsport Network. 5 December 2018. Retrieved 5 December 2018.
- "New International F3 car set to use GP3 engine". motorsport.com. Motorsport Network. Retrieved 5 July 2018.
- Hatton, Gemma. "FIA reveals new 2019 F3 car". racecar-engineering.com. Retrieved 22 June 2020.
- "Formula 3 2019 - Team Standings". fiaformula3.com. Retrieved 22 June 2020.
- "Formula 3 2019 - Driver Standings". fiaformula3.com. Retrieved 22 June 2020.
- "FIA Formula 2 and FIA Formula 3 confirm opening eight rounds of their revised 2020 calendars". FIA Formula 3 - The Official F3 Website. 2 June 2020. Retrieved 2 June 2020.