The Chevrolet Corvette (C1) is the first generation of the Corvette sports car produced by Chevrolet. It was introduced late in the 1953 model year, and produced through 1962.[3] This generation is commonly referred to as the "solid-axle" generation, as the independent rear suspension did not appear until the 1963 Stingray.

The Corvette was rushed into production for its debut model year to capitalize on the enthusiastic public reaction to the concept vehicle, but expectations for the new model were largely unfulfilled.[4] Reviews were mixed and sales fell far short of expectations through the car's early years. The program was nearly canceled, but Chevrolet decided to make necessary improvements.



Harley Earl, as head of GM's Styling Section, was an avid fan of sporting cars. He recognized that GIs returning after serving overseas in the years following World War II were bringing home MGs, Jaguars, and Alfa Romeos.[5] In 1951, Nash Motors began selling an expensive two-seat sports car, the Nash-Healey, that was made in partnership with the Italian designer Pininfarina and British auto engineer Donald Healey,[6] but there were few moderate-priced models.[7] Earl convinced GM that they needed to build an all-American two-seat sports car, and with his Special Projects crew began working on the new car in late 1951. The last time Chevrolet offered a 2-door, 2-passenger convertible/roadster body style was in 1938 with the Chevrolet Master.[8]

Prototype EX-122

The secretive effort was code-named "Project Opel" (after GM's German division Opel).[7][9] The result was the hand-built, EX-122 pre-production Corvette prototype, which was first shown to the public at the 1953 General Motors Motorama at the Waldorf-Astoria in New York City on January 17, 1953. When production began six months later, at an MSRP of US$3,513 ($35,580 in 2021 dollars [10]), it had evolved into a considerably costlier car than the basic $2,000 roadster Harley Earl originally had in mind.[11] The EX-122 car is now located at the Kerbeck Corvette museum in Atlantic City and is believed to be the oldest Corvette in existence.[12]

Design and engineering

To keep costs down, GM executive Robert F. McLean mandated off-the-shelf mechanical components, and used the chassis and suspension design from the 1949–1954 Chevrolet passenger vehicles. The drivetrain and passenger compartment were moved rearward to achieve a 53/47 front-to-rear weight distribution. It had a 102 in (2,591 mm) wheelbase. The engine was a 235 cu in (3.85 L) inline six engine[13][1] that was similar to the 235 engine that powered all other Chevrolet car models, but with a higher-compression ratio, three Carter side-draft carburetors, mechanical lifters, and a higher-lift camshaft. Output was 150 horsepower (110 kilowatts). Because there was currently no manual transmission available to Chevrolet rated to handle 150 HP, a two-speed Powerglide automatic was used. 0–60 mph (0–97 km/h) time was 11.5 seconds.

Three body variants were created. The roadster was built as the Corvette, the Corvair fastback variant never went in production, and two-door Nomad station wagon was eventually built as the Chevrolet Nomad.[14][1]

During the last half of 1953, 300 Corvettes were to a large degree, hand-built on a makeshift assembly line that was installed in an old truck plant in Flint, Michigan[4] while a factory was being prepped for a full-scale 1954 production run. The outer body was made out of then-revolutionary glass fiber reinforced plastic material. Although steel shortages or quotas are sometimes mentioned as a factor in the decision to use fiberglass, no evidence exists to support this. In calendar years 1952 and 1953 Chevrolet produced nearly 2 million steel-bodied full-size passenger cars and the intended production volume of 10,000 Corvette for 1954 was only a small fraction of that.[15]

The body engineer for the Corvette was Ellis James Premo. He presented a paper to the Society of Automotive Engineers in 1954 regarding the development of the body.[15] Several excerpts highlight some of the key points in the body material choice:

The body on the show model was made of reinforced plastic purely as an expedient to get the job done quickly.

Although we were going ahead with the building of an experimental plastic body in order to get a car rolling for chassis development work – at the time of the Waldorf Show, we were actually concentrating body-design-wise on a steel body utilizing Kirksite tooling for the projected production of 10,000 units during the 1954 model year. It was some time later that we decided to produce this quantity in reinforced plastic.

About this time, some doubt was expressed that we should build the 1954 model of steel. People seemed to be captivated by the idea of the fiberglass plastic body. Furthermore, information being given to us by the reinforced plastic industry seemed to indicate the practicality of fabricating plastic body parts for automobiles on a large scale.

A 55-degree raked windshield was made of safety glass, while the license plate holder was set back in the trunk, covered with a plastic window.[16] Underneath the new body material were standard components from Chevrolet's regular car line, including the "Blue Flame" inline six-cylinder engine, two-speed Powerglide automatic transmission, and drum brakes. The engine's output was increased to 150 hp (110 kW) via a Carter triple-carburetor system exclusive to the Corvette, but performance of the car was decidedly "lackluster".[4] Compared to the British and Italian sports cars of the day, the Corvette lacked a manual transmission and required more effort to bring to a stop, but like their British competition, such as Morgan, was not fitted with roll-up windows;[17] this would have to wait until some time in the 1956 model year.[16] A Paxton centrifugal supercharger became available in 1954 as a dealer-installed option, greatly improving the Corvette's straight-line performance,[18] but sales continued to decline.

The Chevrolet division was GM's entry-level marque.[19] Managers at GM were seriously considering shelving the project,[20] leaving the Corvette to be little more than a footnote in automotive history, and would have done so if not for three important events. The first was the 1955 introduction of Chevrolet's first V8 engine since 1919. Late in the model year,[citation needed] the new 195 hp (145 kW) 265 small-block became available with a Powerglide automatic transmission, until the middle of the production year when a manual 3-speed became available, coupled to a 3.55:1 axle ratio, the only one offered. The engine was fitted with a single 2218S or 2351S WCFB four-barrel (four-choke) Carter carburetor.[16] The combination turned the "rather anemic Corvette into a credible if not outstanding performer".[4] The second was the influence of a Russian émigré in GM's engineering department, Zora Arkus-Duntov. The third factor in the Corvette's survival was Ford's introduction of the 1955 two-seat Thunderbird,[21] which was billed as a "personal luxury car", not a sports car. Even so, the Ford-Chevrolet rivalry in those days demanded GM not appear to back down from the challenge. The original concept for the Corvette emblem incorporated an American flag into the design, but was changed well before production since associating the flag with a product was frowned upon.


Performance-themed logo


The 1953 model year was not only the Corvette's first production year, but at 300 produced it was also the lowest-volume Corvette. The cars were essentially hand-built and techniques evolved during the production cycle, so that each 1953 Corvette is slightly different. All 1953 models had Polo white exteriors, red interiors,[17] and black canvas soft tops. Order guides showed heaters and AM radios as optional, but all 1953 models were equipped with both. Over two hundred 1953 Corvettes are known to exist today.[22] They had independent front suspension,[2] but featured a rigid axle supported by longitudinal leaf springs at the rear. The cost of the first production model Corvettes in 1953 was US$3,490 ($35,347 in 2021 dollars [10]).[23]

The quality of the fiberglass body as well as its fit and finish were lacking. Other problems, such as water leaks and doors that could open while the car was driven, were reported with the most severe errors corrected in subsequent units produced, but some shortcomings continued beyond the Corvette's inaugural year.[4] By December 1953, Chevrolet had a newly-equipped factory in St. Louis ready to build 10,000 Corvettes annually. However, negative customer reactions in 1953 and early 1954 models caused sales to fall short of expectations.


In 1954, only 3,640 of this model were built and nearly a third were unsold at year's end. New colors were available, but the six-cylinder engine and Powerglide automatic, the only engine and transmission available, were not what sports car enthusiasts expected. It is known that 1954 models were painted Pennant Blue, Sportsman Red, and Black, in addition to Polo White. All had red interiors, except for those finished in Pennant Blue which had a beige interior and beige canvas soft top. Order guides listed several options, but all options were "mandatory" and all 1954 Corvettes were equipped the same.[24]

Interior of a 1954 Corvette

In the October 1954 issue of Popular Mechanics, there was an extensive survey of Corvette owners in America. The surprising finding was their opinions in comparison to foreign sports cars. It was found that 36% of those taking the survey had owned a foreign sports car, and of that, half of them rated the Corvette as better than their previous foreign sports car. Nineteen percent rated the Corvette as equal to their foreign sports car and 22% rated the Corvette as inferior. While many were well pleased with the Corvette, they did not consider it as a true sports car. The principal complaint of the surveyed owners was the tendency of the body to leak extensively during rainstorms.[25]


Chevrolet debuted its 265 cu in (4.34 L) small-block, 195 hp (145 kW) V8 in 1955 and the engine was available for the Corvette. Early production 1955 V8 Corvettes continued with the mandatory-option Powerglide automatic transmission (as did the few 6-cylinder models built). A new three-speed manual transmission became available later in the year for V8 models, but was not popular with about 75 equipped with it.[22] Exterior color choices were expanded to at least five, combined with at least four interior colors. Soft-tops came in white, dark green or beige and different materials.[1] A total of 700 1955 Corvettes were built, making it second only to 1953 in scarcity. The "V" in the Corvette emblem was enlarged and gold colored, signifying the V8 engine and 12-volt electrical systems, while 6-cylinder models retained the 6-volt systems used in 1953-54.[16]

Although not a part of the original Corvette project, Zora Arkus-Duntov was responsible for the addition of the V8 engine and three-speed manual transmission. Duntov improved the car's marketing and image and helped the car compete with the new V8—engined Ford Thunderbird, Studebaker Speedster and the larger Chrysler C-300, and turned the Corvette from its lackluster performance into a credible performer. In 1956 he became the director of high-performance vehicle design and development for Chevrolet helping him earn the nickname "Father of the Corvette."[26][4]

Although the C1 Corvette chassis and suspension design were derived from Chevrolet's full-size cars, the same basic design was continued through the 1962 model even after the full-size cars were completely redesigned for the 1955 model year. This was due to the combined factors of the relatively high re-engineering and re-tooling costs for this low-volume production vehicle, the continued potential for cancellation of the car, and the increased size and weight of the all-new suspension design for the full-size cars, which made it unsuitable for use in the lighter weight Corvette.[citation needed]


Options in 1956-57 included a car radio that featured both transistors –cutting-edge technology at that time – and a vacuum tube
Fuel-injected 1957 convertible


The 1956 Corvette featured a new body, with real glass roll up windows and a more substantial convertible top. The straight-6 engine was dropped, leaving only the 265 cu in (4.3 L) V8. Power ranged from 210 to 240 hp (157 to 179 kW).[27] The standard transmission remained the 3-speed manual, with an optional Powerglide automatic. Other options included power assisted convertible top, a removable hardtop, power windows,[22] and a "then-leading edge" signal-seeking partially transistorized Delco car radio.[28][29] A high-performance camshaft was also available (as RPO 449) with the 240 hp engine.


Visually the 1957 model was unchanged. The V8 was increased to 283 cu in (4.6 L), fuel-injection became a very expensive option, and a 4-speed manual transmission became available after April 9, 1957.[30] GM's Rochester subsidiary used a constant flow system, producing a listed 290 hp (216 kW) at 6200 rpm and 290 lb⋅ft (393 N⋅m) of torque at 4400 rpm.[31] Debate continues to swirl whether this was underrated by Chevrolet (to allow for lower insurance premiums, or give the car an advantage in certain forms of racing) rather than overrated, as was common practice at the time (to juice sales). Either way, it was advertised as producing "One HP per cubic inch", allowing it to claim it one of the first mass-produced engines to do so.

Pushed toward high-performance and racing, principally by its designer, Zora Arkus-Duntov, who had raced in Europe, 1957 Corvettes could be ordered ready-to-race with special performance options, such as an engine fresh air/tach package, heavy-duty racing suspension, and 15 by 5.5 in (380 by 140 mm) wheels.[22]

Sales volume was 3,467, a low number by any contemporary standard and less than 1954's 3,640, making it the third lowest in Corvette history.[24] Fuel-injected models were in short supply and 1,040 were sold.[24]


1958 convertible


In an era of chrome and four headlamps, the Corvette adapted to the look of the day. The 1958 model year and the four that followed all had the exposed four-headlamp treatment and prominent grilles, but a faux-louvered hood and chrome trunk spears were unique to this model year. The interior and instruments were updated, including placing a tachometer directly in front of the driver. For the 1958 model, an 8000 rpm tachometer was used with the 270 hp (200 kW) and 290 hp engines, rather than the 6000 rpm units used in the lower horsepower engines. Optional engine choices included two with twin carburetors (including a 270 hp model with Carter 2613S and 2614S WCFB four-barrels) and two with fuel injection. Power output for the highest-rated fuel-injected engine was 290 hp. Displacement remained 283 cid. For the first time, seat belts were factory-installed rather than being dealer-installed as on previous models.[16] Rare options were RPO 684 heavy-duty brakes and suspension (144), RPO 579 250 hp engine (554), RPO 276 15"×5.5" wheels (404).[22]


1959 was the next to last year for tail lights atop the rear fenders

For the 1959 model, engines and horsepower ratings did not change. Interiors were revised slightly with different instrument graphics and the addition of a storage bin to the passenger side. A positive reverse lockout shifter with "T" handle was standard with 4-speed manual transmission. This was the only year a turquoise convertible top color could be ordered,[16] and all 24-gallon fuel tank models through 1962 could not be ordered with convertible tops due to inadequate space for the folding top mechanism.[24] Rare options: RPO 684 heavy-duty brakes and suspension (142), RPO 686 metallic brakes (333), RPO 276 15"×5.5" wheels (214), RPO 426 power windows (547), RPO 473 power convertible top (661).[22]


There were fewer and heavier teeth in the grill in 1960

The last features to appear in 1960 models included taillamps molded into the rear fenders and heavy grill teeth. New features include aluminum radiators, but only with 270 hp and 290 hp engines. Also for the first time, all fuel-injection engines required manual transmissions.[16] The 1960s Cascade Green was metallic, unique to the year, and the rarest color at 140 made. Rare options: RPO 579 250 hp engine (100), RPO 687 heavy-duty brakes and suspension (119), RPO 276 15"×5.5" wheels (246), RPO 473 power convertible top(512), RPO 426 power windows (544).[22]


1961 was the last year for two-tone paint until 1978


Twin taillights appeared on the 1961, a treatment that continues to this day. Engine displacement remained at 283 cubic inches, but power output increased for the two fuel-injected engines to 275 and 315 hp (205 and 235 kW). Power ratings for the dual-four barrel engines did not change (245 hp and 270 hp) but this was the last year of their availability.[16] This was the last year for contrasting paint colors in cove areas, and the last two-tone Corvette of any type until 1978. Also debuting in 1961 was a new boat-tail that was carried through to the C2. Rare options: RPO 353 275 hp engine (118), RPO 687 heavy-duty brakes and steering (233), RPO 276 15"×5.5" wheels (357), RPO 473 power convertible top (442).[22]


With a new larger engine the 1962 model year Corvette was the quickest to date. Displacement of the small-block V8 increased from 283 cu in (4,640 cc) to 327 cu in (5,360 cc), which produced 250 hp (190 kW) in its base single 4-barrel carburetor version.[32] Hydraulic valve lifters were used in the standard and optional 300 hp (220 kW) engines, solid lifters in the optional carbureted 340 hp (250 kW) and fuel-injected 360 hp (270 kW) versions. Dual 4-barrel carburetor engines were no longer available.

1962 saw the last solid-rear-axle suspension, that had been used from the beginning. Rocker panel trim was seen for the first time, exposed headlights for the last, until 2005.[24] This was the last Corvette model to offer an optional power convertible top mechanism. Rare options: RPO 488 24-gallon fuel tank (65), RPO 687 heavy-duty brakes and steering (246), RPO 473 power convertible top (350), RPO 276 15"×5.5" wheels (561).[22]

Scaglietti Corvette

A 1959 Scaglietti Corvette

Production notes

Production notes[16]
Year Production Base Price Notes
1953 300 $3,498 First year production starts on June 30; polo white with red interior and black top is only color combination; Options standard until 1955 for the car were interior door handles; "clip in" side curtains in place of roll-up windows
1954 3,640 $2,774 Production moves to St. Louis; blue, red, and black are added; beige top, longer exhaust pipes
1955 700 $2,774 Both straight-6 and 265 cu in V8 engines produced; 3-speed manual transmission added late in the model year
1956 3,467 $3,120 New body with roll-up windows; V8-only; 3-speed manual transmission becomes standard equipment and Powerglide moved to option list
1957 6,339 $3,176 283 cu in V8; Optional 4-speed manual and fuel injection added
1958 9,168 $3,591 Quad-headlight body and new interior. Fake-louvers on hood and chrome strips on trunk lid. Number of teeth in grille reduced from thirteen to nine.
1959 9,670 $3,875 First black interior and dash storage bin; only year with a turquoise top. Louvres and chrome strips from '58 removed.
1960 10,261 $3,872 Very minor changes to the interior: red and blue bars on the dash logo, vertical stitching on seats
1961 10,939 $3,934 New rear styling, bumpers, and round taillights. New fine-mesh grill.
1962 14,531 $4,038 327 cu in V8 engine; last year with a trunk until 1998 and last year with exposed headlights until 2005. New black grill with chrome surround, chrome rocker panel moldings.
Total 69,015


Engine Year Power
235 cu in (3.9 L) Blue Flame I6 1953–1954 150 hp (110 kW)
1955 155 hp (116 kW)
265 cu in (4.3 L) Small-block V8 1955 195 hp (145 kW)
1956 210 hp (160 kW)
240 hp (180 kW)
283 cu in (4.6 L) Small-block V8 1957 220 hp (160 kW)
1958–1961 230 hp (170 kW)
1957–1961 245 hp (183 kW)
270 hp (200 kW)
283 cu in (4.6 L) Small-block FI V8 1957–1959 250 hp (190 kW)
1960–1961 275 hp (205 kW)
1957 283 hp (211 kW)
1958–1959 290 hp (220 kW)
1960–1961 315 hp (235 kW)
327 cu in (5.4 L) Small-block V8 1962 250 hp (190 kW)
300 hp (220 kW)
340 hp (250 kW)
327 cu in (5.4 L) Small-block FI V8 1962 360 hp (270 kW)

See also



  1. ^ a b c d e f g Gunnell, John, ed. (1987). The Standard Catalog of American Cars 1946-1975. Krause Publications. pp. 192–203. ISBN 0-87341-204-4.
  2. ^ a b "1955 Corvette Brochure". p. 4. Retrieved 2013-01-28.
  3. ^ Kolecki, Scott (January 19, 2021). "The 1953-1962 C1 Corvette Buyers Guide". Retrieved July 29, 2021.
  4. ^ a b c d e f Prince, Richard (2002). Corvette Buyers Guide, 1953-1967. MotorBooks/MBI Publishing. ISBN 978-0-7603-1009-0. Retrieved 2010-10-22.
  5. ^ Leffingwell, Randy; Newhardt, David (2005). Mustang. MotorBooks/MBI Publishing. p. 13. ISBN 978-0-7603-2183-6. Retrieved 2013-01-28.
  6. ^ Adler, Dennis (2004). Fifties Flashback. MotorBooks/MBI Publishing. p. 145. ISBN 978-0-7603-1927-7. Retrieved 2013-01-28.
  7. ^ a b Leffingwell, Randy (2002). Corvette: America's Sports Car. MotorBooks/MBI Publishing. pp. 14–19. ISBN 978-0-7603-1352-7.
  8. ^ Kimes, Beverly (1996). Standard catalog of American Cars 1805–1942 (third ed.). Krause publications. pp. 283–302. ISBN 0-87341-478-0.
  9. ^ Wong, Jon (July 19, 2019). "Chevy Corvette history from 1953 to today's new mid-engined C8: 1953-1962 C1 Corvette: Project Opel". Retrieved May 11, 2022.
  10. ^ a b 1634–1699: McCusker, J. J. (1997). How Much Is That in Real Money? A Historical Price Index for Use as a Deflator of Money Values in the Economy of the United States: Addenda et Corrigenda (PDF). American Antiquarian Society. 1700–1799: McCusker, J. J. (1992). How Much Is That in Real Money? A Historical Price Index for Use as a Deflator of Money Values in the Economy of the United States (PDF). American Antiquarian Society. 1800–present: Federal Reserve Bank of Minneapolis. "Consumer Price Index (estimate) 1800–". Retrieved April 16, 2022.
  11. ^ "1953 Corvette". HowStuffWorks. 4 June 2007. Archived from the original on 27 July 2020. Retrieved 10 November 2020.
  12. ^ "EX122 Motorama Experimental Protocol". Kerbeck Corvette. Archived from the original on 20 February 2009. Retrieved 26 April 2009.
  13. ^ Teeters, K. Scott (20 February 2014). "1953 Chevrolet Corvette Blue Flame Six - "Corvette's First Engine"". Super Chevy. Retrieved 12 September 2016.
  14. ^ Concept Cars of the 1950s, History TV
  15. ^ a b Premo, Ellis (1954). "The Corvette Plastic Body". Society of Automotive Engineers. SAE International. 540257. Retrieved 28 September 2014.
  16. ^ a b c d e f g h i Antonick, Mike (November 1999). Corvette Black Book 1953-2000. Powell, Ohio: Michael Bruce Associates. ISBN 0933534469.
  17. ^ a b "1953 Corvette Foldout". p. outside. Retrieved 2013-01-28.
  18. ^ Mueller, Mike (2003). Classic Corvette 30 Years. Crestline Imprints. p. 40. ISBN 978-0-7603-1806-5. Retrieved 2010-10-22.
  19. ^ Ries, Al (2005). Focus: The Future of Your Company Depends on It. HarperCollins. p. 204. ISBN 978-0-06-079990-8.
  20. ^ Baker, Ronald J. (2006). Pricing on Purpose: creating and capturing value. John Wiley and Sons. p. 89. ISBN 978-0-471-72980-8. Retrieved 2010-10-22.
  21. ^ McLellan, Dave (2002). Corvette from the Inside. Bentley Publishers. p. 20. ISBN 978-0-8376-0859-4. Retrieved 2010-10-22.
  22. ^ a b c d e f g h i Antonick, Mike (2001). Corvette Price Handbook 2002: 1953-1995 Models With Web Updates. Motorbooks International. ISBN 9780933534506. Retrieved 13 September 2016.
  23. ^ "Here Comes the Corvettes". Popular Mechanics. 100 (6): 82–83. December 1953. Retrieved 10 November 2020.
  24. ^ a b c d e Gunnel, John, ed. (1987). The Standard Catalog of American Cars 1946-1975. Krause Publications. ISBN 0-87341-096-3.
  25. ^ "Corvette Is A Fine Fun Car But It Has Its Limitations". Popular Mechanics. Vol. 102, no. 4. October 1954. pp. 118–122, 356. Retrieved May 11, 2022 – via Google Books.
  26. ^ Mueller, Mike (2000). Corvette, 1968-1982. MotorBooks/MBI Publishing. p. 94. ISBN 978-0-7603-0418-1.
  27. ^ "1956 Corvette Brochure". p. 4. Retrieved 2013-01-28.
  28. ^ Auto Editors of Consumer Guide (June 5, 2007). "1956 Corvette". Retrieved May 11, 2022.{{cite web}}: CS1 maint: uses authors parameter (link)
  29. ^ 1956 GM Year-End Annual Report, pg 15
  30. ^ Mueller, Mike (2012). The Complete Book of Corvette: Every Model Since 1953. Motorbooks. ISBN 9780760341407. Retrieved 14 September 2016.
  31. ^ "1956 Chevrolet Corvette, 1957 MY 2934". 2013-02-28. Retrieved 2018-08-01.
  32. ^ 1962 Corvette Specs, The Corvette Museum


  • Holmes, Mark (2007). Ultimate Convertibles: Roofless Beauty. London: Kandour. pp. 52–53. ISBN 978-1-905741-62-5.

External links